Awlgrip G8010Q; Off-White (Lf)-Quart

Description

Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat. Brush/Roller applications require at least two coats. H3002, 1.3- 4 oz. Sanding between coats with 320-400 grit paper will provide a smoother finish. Mixing & Reduction Spray: Mix by volume one part Awlgrip Topcoat Base Component with one part Awlcat #2/G3010 Spray Converter to a smooth, homogenous mixture. Do not apply G3005 directly to bare wood. Coats two and three are not "full, wet" coats. The third coat should be just heavy enough to obtain full hide (opacity) or color coverage. Achieving maximum gloss and distinction of image requires the primer to be smooth sanded with 280-400 grit paper before topcoat application. Do not apply G3005 over white or pastel colors. Awlgrip colors may also be applied over recently applied Awlgrip topcoats/showcoats – consult your local Technical Sales Representative for advice. Reducer addition level required to achieve 14 seconds viscosity (DIN4 or equivalent) varies color to color. For standard conventional spray application this can be attained by adding up to 25% reducer using the correct spray reducer(s) appropriate for conditions. Reduce 10-33% with T0031. Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. G3010, 4 oz. Allow tack coat to "flash off" 15 to 45 minutes. However, over time, a build up of.

Key Features

• For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz.
• Do not apply G3005 directly to bare wood.
• Allow tack coat to "flash off" 15 to 45 minutes.
• Sanding between coats with 320-400 grit paper will provide a smoother finish.
• Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat.
• Overall mix is 2:1:⅓-1 by volume (8 oz.